The FJX series circulating pump is a cantilever structure, installed horizontally, and therefore has the following characteristics:

1. Slow speed type: meets the requirements of crystallization process and runs smoothly.

2. Excellent hydraulic performance, efficiency>70%, wide high-efficiency zone, and good anti cavitation performance.

3. Advanced shaft seal: Adopting a quick installation double end mechanical seal, equipped with a labyrinth type internal isolation chamber, improving the working conditions of the shaft seal and prolonging its service life.

4. Adjusting pump parameters is easy: the blade installation angle can be adjusted, and changing the speed of the belt drive is easy.

5. High reliability: A guide air chamber is installed at the cantilever end of the shaft to reduce shaft deflection.

6. Water cooled bearing seat: There are water-cooled jackets at the two bearing positions, lubricated with thin oil, and D-grade heavy-duty bearings are selected for long service life

Flow range: 200-32000m ³/h

Lift range: 2-5m

Work pressure: 1MPa · G

Working temperature: ≤ 170 ℃

Note: When placing an order, the user should provide a detailed data sheet, and our company will recommend a reasonable pump model based on the required flow rate, head, and medium characteristics.